SHINESTAR 12 FT Low Pressure Propane Regulator Replacement for Most LP Gas

In Stock


1. Please check to see if the propane tank has the standard propane valve fitting QCC1/Type1, like a Gas Grill, Heater, Fire Pit and Generator. Then see device if the other end is a 3/8inch Male Flare Fitting. 12feet long hose can expand your use space
2. The output pressure of the regulator is set to 11 inches water column which equates to approximately.
3. Low pressure means the high pressure in your propane tank will be reduced and regulated to the correct pressure for your burners to work as designed.
4. Great for BBQ, camping, tailgating, heating needs or having an outdoor cookout.
5. Our propane regulator with hose has excess flow protection for your safety and will automatically shut off.

Q: How do you know if you need a parallel or vertical low pressure regulator hose?
A: They are the same. it depends on the space of your tank tray. If you use the propane tank with no tray, either is fine.


Attention:
1.Warning!!! For your safety ALL propane appliances like gas grills, heaters and stoves are OUTDOOR Use.
2.FULLY TIGHTENED at both propane tank side and grill side before using on your propane appliances to prevent leakage.
3.To check and make sure the hose is away from the OPEN FIRE before installing to your appliances.
4.Keeping the hose away from HIGH TEMPERATURE.

Product Specification:
Certificate : CSA
Outlet Pressure:11''W.C.
Flow Capacity: 80000 BTU/Hr
Length: 12 feet /144 inch (length of rubber hose only)

Please double check your appliance connection if is 3/8'' Male Flare Fitting Connector.
NOTE: The regulator hose end connector not fit 1lb small screw. To ensure that you can buy what you need hose please check your connector before you order